Description

Magnetic Flux Indicators

Flexible indicators used to detect directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075″, .009″ and .010″ that share a common depth.

The indicators are manufactured from permeable magnetic steel sandwiched between two brass plates and designed for repeated use in setting and monitoring magnetic field strength in wet and dry MPI applications.

QQIs

Quantitative Quality Indicator Test Piece Shims

Quantitative Quality Indicators (QQI) are magnetic particle test piece shims with artificial defects used to verify field direction and relative strength. QQIs are also used to balance multi-directional fields and to increase productivity by minimizing magnetizing shots. The QQI indicator shims are packaged in sets of five.

Part Numnber	Product Name	Image	Description
631590	CX-230		0.002 inch (0.05 mm) thickness with a notch flaw depth of 30% of shim thickness
631591	CX-430		0.004 inch (0.10 mm) thickness with a notch flaw depth of 30% of shim thickness
631592	CX4-230		Four circle-cross notch patterns, to be cut by user into four separate shims. 0.002 inch (0.05 mm) thickness with a notch flaw depth of 30% of shim thickness.

Tool Steel Ring

The AS-5282 Tool Steel Ring (formerly Ketos Ring) is a magnetic particle test piece with pre-drilled holes to simulate subsurface discontinuities. It offers a reliable method of verifying magnetic particle system performance when actual test parts with discontinuities are not available.

Magnetic Particle Test Bar

Test bar contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens.

Audiovisual Resources